Rear Hubs & Drive Flanges

 Rear End IndexFront HubsDrag HousingsRotors

   Rear Floater Hubs

  5 on 5 Rear Grand National Hub Standard Weight

 

Standard Steel Rear Hub

   

    Forged steel hub.

    Race proven on our NASCAR truck.

    5x5 Bolt pattern.

    Uses rotor adapter plates - eliminates brake hat

    10 Lbs. Black finished.

   Comes with long course Studs standard & Races

 

 5 x 5 Grand National Lite Weight Steel Rear Hub

 

Lite-Weight Steel Rear Hub

    Ideal for light weight cars.

    Reduces rotating & unsprung weight.

    Uses same drive plate and bearings as the grand national hub (as shown above).

    6 Lbs. Black Finished.

    Comes with short course Studs standard & Races

5 on 5 Rear Grand National Hub Aluminum                             

Aluminum Rear Hub

    

    Ideal for light weight cars.

    Reduces rotating & unsprung weight.

    Uses same drive plate and bearings as the grand national hub (as shown above).

    Machined from billet aluminum.

    7 Lbs. Machined Finish.

    Comes with short course Studs standard & Races

 

Qty:  

 $105

                      10 Lbs

Qty:  

 $125

      7 Lbs

Qty:  

 $175

                       8 Lbs

Qty:  

 $250

                 14 Lbs

 

  Rear Hub Rebuild Parts

   Inner or Outer Bearing 

   ( L610549 )

Hub Bearing

   

Hub Seal   

   ( 29865 )  

 Hub Seal.JPG (13989 bytes)

   Inner or Outer Race

   ( L610510 )

 Bearing Race.JPG (11871 bytes)

Axle Seal

   ( 13534 )

 

    snout seal.JPG (8874 bytes)
Qty:

$27.00

1400-501   Inner / Outer Bearing For Rear Hubs ( #L610549 )

1 Lbs.

Qty:

$11.50

 1400-502      Inner / Outer Race For Rear Hubs ( #L610510 )

1 Lbs.

Qty:

$3.20

 1400-510                                      Hub Seal ( #SCP-2160 )

1 Lbs.

Qty:

$4.45

 1400-511                                   Axle Seal ( #SCP-50395 )

1 Lbs.

Qty:

$.90

 1400-514                                Drive Flange to Hub O-Ring

1 Lbs.

Qty:

$.50

 1400-515                            Drive Flange Hub Cap O-Ring

1 Lbs.

 

   Snout Nuts & Washers
 

 

 

 

 

 Snout Nuts and WashersOrder extras of each of these. You never know when you'll need 'em. CHEAP INSURANCE

Grand National Spindle Nut Socket

 

 

Socket

  

Select the quantity desired and then click the BUY button. You can Check your Cart contents or Check Out at any time by clicking Check Cart button.

Qty: $5.70

1400-512   Right Hand 5x5 Grand National Spindle Nut

1Lbs.

Qty:

$10.00

1400-509                   Left Hand 5x5 Grand National Spindle Nut

1 Lbs.

Qty:

$2.00

 1400-513                     Grand National Spindle Nut Lock washer

1 Lbs.

Qty:

$50.00

 1400-013              Aluminum Spindle nut Socket for Above Nuts

2 Lbs.

 

   Hub Kits

   5 on 5 Grand National Hub Kits

 

 

 

PICTURE SHOWS 2 HUB KITS

 

Lite-weight Kits 1400-401-R or L

are complete for one side & include the following parts:

 

Standard Kits 1400-402-R or L

are complete for one side & include the following parts:

 

5x5-1/2 Kits 1400-403-R or L

are complete for one side & include the following parts:

 

  
Qty:

$295.00

1400-401-R  Light Weight Hub Kit Right Hand Complete       

12 Lbs.

Qty:

$295.00

1400-401-L  Light Weight Hub Kit Left Hand Complete         

12 Lbs.

Qty:

$275.00

1400-402-R   Standard Weight Hub Kit Right Hand Complete

14 Lbs.

Qty:

$275.00

1400-402-L   Standard Weight Hub Kit Left Hand Complete  

14 Lbs.

Qty:

$370.00

1400-403-R   5x5-1/2  Hub Kit Right Hand Complete            

18 Lbs.

Qty:

$370.00

1400-403-L   5x5-1/2 Hub Kit Left Hand Complete                

18 Lbs.

 

   Studs for Front & Rear Hubs

   

              CLICK FOR LARGER PICTURE

    
  • .690" Knurl
  • Heads Machined to Fit Our Hubs
Qty:

$4.00

1400-523                 Short Coarse Stud

.5 Lbs.

Qty:

$4.00

1400-524                   Short Fine Stud

.5 Lbs.

Qty:

$5.00

1400-526                   Long Fine Stud

.5 Lbs.

Qty:

$5.00

1400-527                  Long Coarse Stud

.5 Lbs.

 

   Drive Flanges

   Steel Drive Flange

Steel 5x5 Drive Flange  24 Spline

Heavy Duty Aluminum Drive Flange

Ultimate 7075 Aluminum 5x5 Drive Flange 24 Spline

Standard Duty Aluminum Drive Flange

Standard Aluminum 6061 5x5 Drive Flange 24 Spline

High Pressure Lube

 

Use where rules won't allow aluminum.

High strength steel.

Light weight .

Steel drive flange with cap, bolts &

O-rings.

 

7075-T6 Aluminum.

Ideal for any application.

 Suitable for high horse power and big tires.

 7075 Aluminum drive flange is  unbreakable w/ cap, bolts, O-rings, & hard coat anodized for wear resistance.

 

Suitable for most IMCA type cars.

6061-T6 Aluminum.

Hard coat anodized for wear.

Best with limited power and tire.

  6061 Aluminum Drive Flange with cap, bolts, O-rings, & hard coat
anodized for wear resistance 

Extend the life of your Drive Flanges

We have tested the High Pressure Lube and found it to be the Ultimate Lube for high pressure applications. Also works great for spark plugs, aluminum fittings , etc.

We also recommend High Pressure Lube be applied on a regular basis to improve Drive Flange Life.

Select the quantity desired and then click the BUY button. You can Check your Cart contents or Check Out at any time by clicking Check Cart button.

Qty: $85.00

  1400-006         Steel 5x5 Drive Flange  24 Spline

6Lbs.

Qty:

$110.00

  1400-043-24     Steel 5x5-1/2 Drive Flange  24 Spline

6 Lbs.

Qty:

$125.00

  1400-043-40     Steel 5x5-1/2 Drive Flange  40 Spline

6 Lbs.

Qty:

$95.00

   1400-033-7075  Ultimate 7075 Aluminum 5x5 Drive Flange 24 Spline

3 Lbs.

Qty:

$105.00

   1400-043-7075 Ultimate 7075 Aluminum 5x5-1/2 Drive Flange 24 Spline

3 Lbs.

Qty:

$75.00

   1400-033-6061 Standard Aluminum 6061 5x5 Drive Flange 24 Spline

3 Lbs.

Qty:

$5.00

   1400-531      High Pressure Lube for Splines

1 Lbs.

Qty:

$15.00

   1400-009     Dust Cap for Drive Flanges   (includes o-ring & bolts)

1 Lbs.