- How do I replace the hand mount and T-nut?
- Do Bead Rolls fit on Other Manufacturers Machines?
- Why are the 24" bead rollers billet aluminum and the other bead rollers steel?
- Are you going to make any other models out of billet aluminum?
- What is the throat height on the standard bead rollers?
- What is the difference between the standard motor and the Industrial motor upgrade?
- Can I install a motor later on the manual bead roller?
- Can I upgrade my standard machine to an Industrial motor?
- Why are some of your beads keyed?
- What is the keyway size on your keyed bead rolls?
- What is the power supply needed to run a bead roller?
- Do you offer a voltage converter?
- What are the minimum and the maximum gauge I can do with my bead roller?
- What are the sizes of the Mittler Brothers bead rolls?
- Will your bead rolls fit other manufactures machines?
- Are your bead rolls heat treated?
- Can you make me a set of custom rolls?
- What’s the difference between the standard steel rolls and the nylatron rolls?
- What is the difference between the standard round bead rolls and the edge bead rolls?
- What is the capacity of your tube bead roll?
- What is a step roll?
- What bead roll would I use to wrap material around a tube?
- I cannot get my Hem Roll set to work?
- What roll do I use for doing flames and other bead art?
Hole Saw Notcher
Hydraulic Tube Benders 180° & 90° Models
- What type of Hydraulic Fluid should I use in my pump?
- What is the minimum tube size for the 180° and 90° benders?
- What size (pressure) hydraulic pump do I need to run my bender?
- What is the max capacity of the 180° machine and the 90° machine?
- Can I get a custom Center Line Radius?
- How to I set my start point?
- Do you offer a gain chart?
- How long does it take to make a bend?
- How to I account for kickback?
- Do the Mittler Brother shoes fit other manufacture machines?
- How does the digital readout work?
- Is the 180° machine a rack and pinion design?
Hydraulic Tube Notcher
Manual 180° Tube Bender
Shrinker / Stretcher
- What comes with the Power Shrinker – Stretcher Model # 560?
- What is the Max Capacity of your shrinker / stretchers?
- Are your shrinker / stretchers American made?
- How to I set the adjustable air cylinder on Model # 560?
- Can I buy just individual parts for my shrinker / stretcher?
- What is the proper maintance for my shrinker / stretcher?
Ultimate Tube Notcher
- What do I need to do to get my Ultimate Tubing Notcher to cut on center?
- What is the difference between the single speed and variable speed ultimate tube notchers?
- What is the difference between the standard cutters and the fine cutters?
- What is the shank size of the cutters?
- What is the diameter of the cutters?
- What is the face or cut length of the cutters?
- What is the life span of a cutter?
- Why do I need a bushing or shim with some of the cutters?