|
|
|
|
 |
 |
 |
|
|
|
|
| |
Rear End
Parts & Accessories |
Proudly Made In The USA
 |
|
Housing Ends |
|
All
housing ends are machined from premium grade mild steel so there is no fear
of cracking when MIG welding is used to attach to the housings. All ends are
1" thick unless shown otherwise.
Click On Individual End For
Larger Picture
|
 |
 |
 |
|
A:
Standard Big Ford
1000-260 |
B:
Late Model Big Ford
1000-254 |
C:
Big Ford with Seal
1000-253 |
 |
 |
 |
|
D:
Oldsmobile
1000-251 |
E:
Oldsmobile 2"
1000-252 |
F:
Symmetrical ( lamb )
1000-255 |
|
Fill Caps |
|
Our
filler caps are machined from billet aluminum blanks and finished to
brilliant machined look. The large ( 2-1/2" dia. ) caps are available
machine finished blank, machine finished MB engraved and machine finished,
black anodized and MB engraved. The small ( 1-1/4" ) caps are only
available machine finished.
Quantity
Discounts available on 25 or more pieces. Custom engraving also
available on quantity purchases of Black Anodized 2-1/2" Caps. Call
for Pricing. |
|
Click On Individual End For
Larger Picture
|
|
|
 |
 |
|
|
|
2-1/2" Dia. $40 set |
1-1/4" $30 set |
|
|
Rear
End Vent |
|
This
vent has 1/8" pipe thread to fit the weld on bung. Drill an 1/8"
hole in your housing and weld on the bung, simple but effective. |
|
Click
for Larger Picture
|
|
|
 |
|
|
Drain
Plug And Bung |
|
The
1/2" pipe allen plug threads into the special low profile weld bung
to give you an efficient and safe drain option at an economical price.
These are the same pieces used on every one of our Drag housings. A special
Tall weld bung is available for applications that see alot of heavy duty
service. These require a 7/8" diameter hole. |
|
Click
for Larger Picture
|
|
|
 |
|
|
Third
Member Studs |
|
These
are the same Grade 8 studs that we use in all the housings we manufacture. The
splines ensure a good press fit into 3/8" holes. They come in sets of
10. Buy at least 1 set so you have a spare for when you strip one when you
least expect it. |
|
Click
for
Larger Picture
|
|
|
 |
|
|
MB9 Banjos |
-
These banjo
sections are an ideal starting point for your rear end project. No more
rusted and pitted junkyard stuff.
-
These banjo
sections are built in house from 10GA
(.134") 50k
High Strength Material.
-
They are
precision robotic laser cut and welded.
-
Internal gussets for added strength.
-
Precision machined mounting surface.
-
Comes With Studs Installed
|
|
Click
for
Larger Picture
|
|
|
22-1/4" Long / 19-1/2Lbs. |
|
|
Track 9 Banjos |
-
These banjo
sections are an ideal starting point for your rear end project. No more
rusted and pitted junkyard stuff. We use hundreds of these each year for
circle track, street rod and off road projects.
-
They
are precision robotic laser cut and welded.
-
Internal gussets for added strength.
-
Precision ground mounting surface.
-
7" deep tube sockets for a secure axle tube fit.
-
Comes With Studs Installed
-
HD 3/16" is NASCAR™
approved.
|
|
Click
for
Larger Picture
|
|
|
STD. is 27" Long
/ 20Lbs. |
|
|
Econo 9" Banjos |
-
These banjo
sections are an ideal for the builder with an eye on saving a few bucks.
-
They are
precision robotic laser cut and welded.
-
Precision ground mounting surface.
-
Round Style Back
-
Comes With Studs Installed
|
|
Click
for
Larger Picture
|
|
|
22-3/4" Long / 25Lbs. |
|
|
Rear
End Narrowing Kits |
|
Narrow
any rear end for racing or rodding applications with these precision made
kits. An 1-1/2" x 60" precision ground line up bar is passed through the
trimmed rear end housing and through the inner bearing blocks. This
gives you the absolute rear axle center line. The housing ends are then
slipped over the housing end line up blocks and then slid onto the shaft.
This provides you with a very true and square installation.
|
|
1000-RENK1
TUBE END STYLE HOUSING
NARROWING KIT CONTAINS:
|
|
Inner Blocks
Small Ford / GM 10 Bolt
1000-002-2
( 2.890")
Big Ford 9" / GM 12
Bolt / 8.8" Ford
1000-002-4
(3.062")
Dana 60
1000-002-1 (3.812") |
Outer Blocks
Big Ford / Mopar
1000-001-4
(3.150" / 2.875")
Pinion Centerline Gauge
1000-004
60" x 1-1/2" Polished Shaft
1000-001-3
|
 |
|
|
1000-RENK2
FLOATER STYLE HOUSING
NARROWING KIT CONTAINS:
|
|
Inner Blocks
1 set your choice of inner
blocks
Small Ford / GM 10 Bolt
1000-002-2
( 2.890")
Big Ford 9" / GM 12
Bolt / 8.8" Ford
1000-002-4
(3.062")
|
Outer Rings for MB Snouts
1000-005
Tube Line Up Rings
1000-006
Pinion Centerline Gauge
1000-004
60" x 1-1/2" Polished Shaft
1000-001-3
|
|
INNER BEARING BLOCKS AVAILABLE |
|
Small Ford / GM 10 Bolt
|
2.890"
|
1000-002-2
|
|
Big Ford / GM 12
Bolt / 8.8 Ford |
3.062"
|
1000-002-4 |
|
Chevy Truck 12 Bolt
/ Impala |
2.870" |
1000-002-3 |
|
Dana 60 |
3.812" |
1000-002-1 |
| |
|
|
|
Outer Line Up Blocks
Available |
|
Big Ford / Mopar |
3.150" / 2.875"
|
1000-001-4 |
|
GM Car
|
2.250" / 2.535"
|
1000-001-5 |
|
Tube Line Up Ring for
Floater |
2.625"
|
1000-006 |
|
Floater Snout Alignment Ring |
1.872" |
1000-005 |
|
Pinion Centerline
Gauge |
-
This
gauge makes locating the true pinion
centerline a snap
-
Fits 9" Ford, Dana 60, Oldsmobile. Mopar
8-3/4", GM 12 Bolt and Ford 8.8"
-
Precision
CNC Machined and engraved
|
|
|
|
|
|
Pinion Angle
Plate |
|
This
great little item gives you a quick and simple method of knowing and setting
your pinion angle. Use this when first setting up your chassis or when
making changes. This will allow you to keep and maintain this critical
angle.
Just
bolt the plate to the right side third member studs and then you can use
your
digital level
to set your pinion angle. |
|
 |
|
 |
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
