These housing are constructed with Brand New TRACK9 Banjos,  MB9 Banjos or Econo Banjos. The tubes are 3" mild steel with either 3/16" or 1/4" wall thickness. Your choice of housing ends is included. These are MIG welded standard but can be TIG welded for an additional fee. These housing can provide an excellent platform for GM and MOPAR rear end conversions as well base housings for Street / Strip applications.  Street rodders should also look into one of these housings for a cost effective alternative to junk yards.

These housings are specifically designed for Dragster applications. The face plates are precision ground for a perfect fit up and seal. The center section and end bells are computer designed for the specific width. Each housing comes with a fill cap and bung, drain plug and bung,  vent fitting and bung and your choice of any of our standard housing ends. All housings are TIG welded. Customer supplied brackets can be installed or use our in house engineering and plasma cutting to get a custom set designed. We make these housings for some of the biggest dragster shops in the country. We also do these style housings for 4-Link dragsters. 3/8" face plates and faceplate support gussets are also available.

Tube end  style housings are ideal for many different applications. Many shops purchase these to have "IN STOCK" for the special jobs. Street Rodders as well as Street Strip guys can benefit from the additional strength and the good looks. These are also a good starting point for accomplished home builders to start their project from with out having to worry about not having all the fixtures needed to "Get it Straight". As with all of our housings the face plates are precision ground for a perfect fit up and seal. The center section and end bells are are computer designed for the specific width. Each housing comes with a  fill cap and bung, drain plug and bung,  vent fitting and bung and your choice of any of our standard housing ends. All housings are TIG welded. 

This  style of housing is comparable to what is used in most Pro Stocks these days. We offer it in mild steel as well as Moly, but most of what we build are Moly. This is an incredibly strong housing with a good weight to strength ratio. 3", 3-1/4" and 3-1/2" diameter tubes are available. The back brace pictured is optional, but highly recommended, for the ultimate in flex reduction. As usual, we use our precision ground face plate and fixtures to manufacture you a quality product that is what YOU want and NEED. Each housing is hand crafted to your specifications and precision TIG welded. Each housing comes with a  fill cap and bung, drain plug and bung,  vent fitting and bung and your choice of any of our standard housing ends.

Options abound for this housing. Super Gas, Super Comp, and similar vehicles are good candidates for this housing type.